<dd id="0dw4f"><pre id="0dw4f"></pre></dd>
<legend id="0dw4f"></legend>

  • <progress id="0dw4f"><pre id="0dw4f"></pre></progress>
  • <button id="0dw4f"></button><rp id="0dw4f"></rp>
    <tbody id="0dw4f"></tbody>
    <th id="0dw4f"><track id="0dw4f"></track></th>

      <progress id="0dw4f"><pre id="0dw4f"></pre></progress>
      <dd id="0dw4f"><track id="0dw4f"></track></dd>

      <button id="0dw4f"><acronym id="0dw4f"></acronym></button>
        <rp id="0dw4f"></rp><rp id="0dw4f"></rp>
      1. <rp id="0dw4f"></rp>
        <button id="0dw4f"><acronym id="0dw4f"></acronym></button>
        首頁 > EN50155認證車載工控機

        MVS 5210-R


        Multitasking PC+NVR
        Train information stamp in video
        8 x M12 10/100/1000 Mbps 802.3af PoE ports
        VMS software installed
        5th generation Intel® Core? dual core i7-5650U, 2.2GHz
        Dual removable SATA 3.0 SSD/HDD
        EN50155 Class TX conformity
        24VDC and 110VDC power input


        Video Codec
        - H.264

        Audio Codec
        - G.726/G.711

        Live View Resolutions
        - QVGA/VGA/SXGA/Full HD/3M/5M

        Recording Resolution
        - QVGA~5M

        Live Preview
        - Support 1/4/9 division, full-screen, snapshot

        - Round the clock/motion record modes/event trigger

        Record Device
        - 2 x 2.5” SATA 2.0 removable HDD/SSD trays with lock

        - 1/4/9 division, full-screen/snapshot/display original ratio or fit window
        - Search mode: Play/reverse/pause/seek/pre frame/next frame
        - Speeds: 1/4, 1/2, 1, 2, 4, 8, 16, 32

        Video Stamp
        - Capability to show and record railway information in video
        * AMTK camera is required

        Camera Setting
        - Auto search, profile selectable, ONVIF support

        Disk Management


        - 5th generation Intel® Core? dual core i7-5010U, 2.1GHz

        - 2-channel 204-pin DDR3L SO-DMIM socket support 1600MHz up to 16GB, default 2GB industrial grade memory

        - 1 x CFast (externally accessible), 1 x mSATA

        - 1 x full size Mini-PCIe socket (USB 2.0), 1 x full size Mini-PCIe socket (USB 2.0 + PCIe), 1 x full size Mini-PCIe socket (mSATA)

        GPS and On Board Sensor
        - 1 x default U-blox NEO-M8N GNSS module for GPS/Gloness/QZSS/Galileo/Beidou
        - Optional modules with Dead Reckoning available
        - Built-in G-sensor

        Power over Ethernet
        - 8-port M12 for 10/100/1000 Mbps PoE IEEE 802.3af conformity, total 60W


        PC Function
        - 4 x LED indicators for power/storage/WLAN/WWAN
        - 1 x CFast socket with cover. 1 x Reset button
        - 2 x dual USB type A connectors for 1 x USB 3.0 + 1 x USB 2.0 port
        - 1 x DB15 connector
        MCU DIO (2 x DI, 2 x DO), 1 x analog input, 1 x speed frequency input, 1 x iButton, 1 x RS232 (for RFID reader w/ 12VDC output),

        1 x direction signal for optional Dead Reckoning module
        - 2 x externally accessible SIM card sockets (selectable)
        - 6 x antenna holes for WWAN/WLAN/BT/GPS

        NVR Function
        - 2 x removable 2.5" HDD/SSD trays with lock
        - 1 x DB-15 VGA output for live view
        - 1 x DB-15 VGA input for PC VGA switch


        PC Function
        - 8 x M12 10/100/1000 Mbps PoE ports
        - 2 x M12 10/100/1000 Intel® Fast Ethernet with LED
        - 1 x 24VDC/110VDC input in circular connector with ignition and 80W typical power consumption
        - 1 x dual USB type A connector for USB 3.0 port + USB 2.0 port
        - 1 x M12 connector for 1 x Mic-in and 1 x Line-out
        - 1 x DB-15 VGA, resolution up to 2560 x 1600 @60Hz
        - 1 x DB26 LVDS interface with 12V and USB2.0
        - 2 x DB-9 RS-232/422/485 (w/ optional 3KV isolation protection)
        - 1 x 16-pin terminal block connector
        - 1 x CAN Bus 2.0B (on board)
        - 8 x GPIO
        (4 x Digital inputs, w/ optional 3KV isolation protection)
        Input voltage (internal type): 5VDC TTL (default)
        Input voltage (source type): 3~12VDC
        (4 x Digital outputs, w/ optional 3KV isolation protection)
        Digital output (sink type): 5VDC TTL (default), max current: 20mA
        Digital output (source type): 3~24VDC, max current: 150mA

        NVR Function
        - 2 x USB type A connectors, 1 x Reset button
        - 1 x switch for VGA input selection (NVR or PC)
        - 4 x LED indicators for power/storage/storage alarm/camera
        - 1 x phone jack 3.5mm for 1 x Line-out


        Selectable boot-up & shut-down voltage for low power protection by software. Setting 8-level power on/ off delay time by software. Support S3/S4 suspend mode

        Optional internal 1100mAh, Li-Polymer rechargeable battery

        支持操作系統 Windows 7/WES7/Windows 8/WES8/Linux kernel 3.X

        260mm (W) x 206mm (D) x 137mm (H) (10.24" x 8.11" x 5.39")



        Operating temperatures: EN50155 Class TX (w/ industrial SSD) with air flow

        Storage temperatures: -40°C~80°C

        Relative humidity: 10% to 90% (non-condensing)

        Vibration (random): 1g@5~500 Hz (in operation, HDD), 2g@5~500 Hz (in operation, SSD)

        Vibration (SSD/HDD):
        - Operating: MIL-STD-810G, Method 514.6, Category 4, common carrier US highway truck vibration exposure
        - Storage: MIL-STD-810G, Method 514.6, Category 24, minimum integrity test

        Shock (SSD/HDD):
        - Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g
        - Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75g

        CE approval, FCC Class A, EN50155 Class TX