<dd id="0dw4f"><pre id="0dw4f"></pre></dd>
<legend id="0dw4f"></legend>

  • <progress id="0dw4f"><pre id="0dw4f"></pre></progress>
  • <button id="0dw4f"></button><rp id="0dw4f"></rp>
    <tbody id="0dw4f"></tbody>
    <th id="0dw4f"><track id="0dw4f"></track></th>

      <progress id="0dw4f"><pre id="0dw4f"></pre></progress>
      <dd id="0dw4f"><track id="0dw4f"></track></dd>

      <button id="0dw4f"><acronym id="0dw4f"></acronym></button>
        <rp id="0dw4f"></rp><rp id="0dw4f"></rp>
      1. <rp id="0dw4f"></rp>
        <button id="0dw4f"><acronym id="0dw4f"></acronym></button>
        首頁 > 特種車輛無風扇、加固一體機

        VMC 3020




        10.4" XGA TFT LCD monitor with 5-wire resistive touch
        Aluminum die-casting and fanless design
        Built-in Intel Atom® x5-E3930 processor, 1.8GHz
        Automatic/manual brightness control
        Touch with heater supported
        On screen F1 ~ F10 programmable function keys
        Powered USB and COM (5V/12V, 1.5A) for accessories
        Military standard for vibration and shock
        UPS Battery supported
        iButton and RFID for ID identification
        Wide range DC input from 9V~60V DC in
        Sunlight readable capability: 1,200nits LCD brightness
        Operating system: Windows and Linux

        LCD規格參數 0.4-inch TFT LCD panel with LED backlight
        1024 x 768 pixels (XGA)
        Brightness: 1200 cd/m2 (typical)
        Viewing angle: 140° (H):120°(V)
        Contrast ratio: 500:1 (typical)
        觸摸屏 5-wire resistant touch
        Anti-glare coating surface
        Transmission rate: 81 ± 3%
        CPU & 芯片組 Intel Atom® x5-E3930 processor dual core 1.8GHz
        內存 One 204-pin DDR3L 1600MHz SO-DIMM slot (Default: 2GB)
        存儲 1 x CFast
        1 x 2.5" SATA SSD bay
        擴展 1 x half-size mini-PCIe socket (PCIe + USB) for WLAN option
        1 x full-size mini-PCIe socket (USB) x 1 for WWAN option
        1 x M.2 key-E (PCIe + SDIO + UART + USB) for WLAN option
        1 x SIM slot
        前面板 5 x on screen display buttons
        Power on/off
        Volume control (+/-)
        Brightness control (+/-)
        Light sensor
        4 x LED indicators (power/battery charging, WLAN, shift, storage)
        F1 ~ F10 programmable function keys
        2 x Built-in 2W speakers
        側面IO口 Right Side:
        1 x CFast card slot
        System reset button
        USB 2.0 host type A connector
        Left Side:
        1 x antenna for WWAN
        底部IO接口 1 x Power Switch (ATX mode)
        Lockable power connector (power, ignition, ground)
        2 x RS232 (full signals, RI, 0V, 5V/1.5A, 12V/1.5A)
        1 x DB15
        - 1 x Isolated CAN 2.0B
        - 1 x iButton
        - 1 x RFID (12V/1A. 5V/1A, 4pin)
        - 1 x Optional RS232 Tx/Rx (share with GPS UART)
        - 2 x GPI
            Sink type: 5VDC TTL (default)
            Source type: 3 ~ 28VDC
        - 2 x GPO
            Sink type: 5VDC TTL (default), max current: 20mA
            Source type: 3 ~ 28VDC, max current: 150mA
        1 x Powered USB (5V/1.5A, 12V/1.5A)
        1 x USB Type A (5V/1A)
        1 x Mic-in, 1 x Line-out
        1 x Antenna for GPS
        頂部 2 x Antenna for Wi-Fi
        機械結構 Cooling system: Fanless
        Enclosure: Aluminum die castig
        Mounting: VESA 75/100 & desktop mounting
        Ingress protection: front panel IP65
        Dimension: 289.98mm (W) x 229.97mm (H) x 77.95mm (D), including battery
        Weight: 3kg, 6.61lb
        電源管理 9V~60V DC in (UPS: 12V, 24V, 36V and 48V)
        Reverse protection/over voltage protection/under voltage protection
        Ignition On/Off control & programmable On/Off delay timing
        Wake up by SMS, RTC and ignition
        操作系統 Windows 10
        Linux: YOCTO (by request)
        運行環境 Operating temperatures: Ambient with air -30°C to 60°C
        Storage temperatures: -30°C to 70°C
        Relative humidity: 10% to 90% (non-condensing)
        Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4
        Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24
        Operating: MIL-STD-810G, Method 516.6, Procedure I, trucks and
        semi-trailers= 20g
        Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground
        equipment= 75g
        安規認證 CE/FCC class B/E13